14
The XR3i has memory for four models. This feature allows
for four different models to be operated with the same trans-
mitter (additional receivers and servos must be purchased
separately) or one model with four different race setups.
Accessing the Model Select Function
1.
Press the
Scroll
and
Channel
keys at the same time
and hold.
2.
Turn the transmitter power switch on to enter System
mode.
3.
If "MDL" does not appear on the screen, press the
Scroll
key until "MDL" appears.
4.
Press the
Increase
or
Decrease
keys to select the desired
model number (1, 2, 3, or 4).
5.
Press the
Scroll
key to access the Model Name Entry
function.
6.
To exit System mode, either turn the transmitter power
switch off or press the
Scroll
and
Channel
keys at the
same time.
The XR3i allows a three-character name to be input for
each of the four models available. The current model with
name will then be displayed in the Normal display screen.
This feature is useful to help identify different models,
setups, etc.
Accessing the Model Name
Entry Function
1.
Press the
Scroll
and
Channel
keys at the same time
and hold.
2.
Turn on the transmitter power switch to enter the
System mode.
3.
Press the
Scroll
key until "MD1" appears on the screen
with the first character flashing.
4.
Press the
Increase
or
Decrease
keys to select the correct
letter/number for the first character (flashing). To clear the
character, pressing the
Increase
and
Decrease
keys at the
same time.
5.
To change the remaining two characters, press the
Channel
key until the desired character to be changed
is flashing.
6.
Press the
Scroll
key to access the Frame Rate function.
7.
To exit the System mode, either turn the transmitter power
switch off or press the
Scroll
and
Channel
keys at the
same time.
Press and hold the
Scroll
and
Channel
keys
at the same time while
turning transmitter
power switch on.
Press the
Increase
or
Decrease
keys to
select the desired
model to be used
(1, 2, 3, or 4).
Press and hold the
Scroll
and
Channel
keys at the
same time while turning
transmitter power switch
on. Next, press the
Scroll
key until the flashing
“M” appears.
Press the
Channel
key to select the
character to be
changed.
Press the
Increase
or
Decrease
keys to
select the correct
letter/number to be used.
md !
1
Character to
be Adjusted
Current Model
Number
mdl
1
Model Select
Fuction
Current Model
Number
SCROLL
ENTER
CHANNEL
INCREASE
CLEAR
DECREASE
SCROLL
ENTER
CHANNEL
INCREASE
CLEAR
DECREASE
Model Select
(System Mode)
Model Name Entry
(System Mode)
4680 JR XR3i manual 7/17/02 12:14 PM Page 14
