NXU-2A Operations Manual
3-4
Interoperability Now!
3.3.2
Command Summary
This is a full list of the commands available in the NXU-2A command mode. More detail is
given on the following pages. You can get a one-line summary of each command by typing
HELP followed by the command.
BAUD <rate> - Set the serial port baud rate
BCAST <mode> - Sets the broadcast mode (0) Normal (1) Connectionless (2) Multicast
CMDPORT <port number> - Set the port used to receive telnet and WAIS commands
CONMODE <0/1> - Places unit in CLIENT (0) or Server (1) mode
CONN <IP address> - Connect this client to a server at IP address
COR <0/1/23> - Sets COR active low (0), high (1), VOX (2), or VMR (3)
CORINH <time> - Set COR inhibit time to 0,500,1000,2000,3000, or 4000 mS
DATA <7/8> - Set the serial port data bits
DISC - Break this client's current connection
DUPLEX <0/1> - Select either full duplex (0) or half duplex (1) for audio
ECHO <ON/OFF> - Enables/disables character echo to console
GATEIP <ip address> - Set gateway IP address for this unit
HANGTM <time> - Set VOX hang time to 500,1000,2000,3000, or 4000 mS
MAC – Return the Ethernet MAC address of this unit
MYIP <ip address> - Set the IP address of this unit
NAME <text description> - Give this unit a name
PARITY <O/E/N> - Set the serial port parity to Odd, Even, or None
PASS <password> - Assign a password for web access
PORT <port number> - Set the IP port used by this unit
REBOOT - Restart this unit
SAVE - Save NXU-2A settings to FLASH memory and restart
SECURITY <security level> - Set the security level (0-255)
SRVRIP <ip address> - Set the IP address of the NXU-2A server
SRVRPORT <port number> - Set the port where to send VOIP traffic
STAT - Return this client's current connection status
Содержание NXU-2A
Страница 12: ...NXU 2A Operations Manual 1 6 Interoperability Now This Page Left Intentionally Blank...
Страница 16: ...NXU 2A Operations Manual 2 4 Interoperability Now Figure 2 1 Outline Dimensions...
Страница 17: ...NXU 2A Operations Manual Interoperability Now 2 5 Figure 2 2 Control and Connector Locations...
Страница 54: ...NXU 2A Operations Manual 7 2 Interoperability Now This Page Left Intentionally Blank...