www.jps.com.tw
104
14.3.4 EGEAR Mode:Standard Pulse Command Mode:Block
※ 14.3.4.1 EGEAR Mode:Standard Pulse Command Mode:Connection
※ 14.3.4.2 EGEAR Mode:Standard Pulse Command Mode:Internal Block
User Set command
Pr.002
Actual Command
Select Operation Mode
Pr.002 =2
Standard EGEAR Mode
Pr.002 =0
Speed/Torque Mode
X/Y Pulse Signal
Pr.110:Pulse category
Pr.009:XY counter
Pr.037:Mul-0
Pr.038:Mul-1
Pr.039:Mul-2
Pr.040:Mul-3
DIx(70):EGEAR-SW0
DIx(71):EGEAR-SW1
Pr.037:Mul-0
EGEAR Multiply Source
Pr.038:Div-0
DIx(61): F-Limit
DIx(66):/F-Limit
DIx(63): R-Limit
DIx(68):/R-Limit
DIx(64): R-Speed SW
DIx(78): F-Speed SW
Enable EGEAR
Digital Input Switch
DIx(84):XY source
DIx(6):Allow EGEAR
DIx(102):Servo-On