8 www.jps.com.tw
2.4.1 Select the parameter to edit or read
【NOTICE】All the operation described below can only work under the condition of the
(parameter mode) or
(edit mode).
By using the operation described below, can select parameter, read value, edit value and write the value into
parameter.
1.
Select parameter
Enter select parameter mode
Press
or
to enter select parameter mode.
or
Touch one of the left or
right side of wheel
lightly.
to enter select
parameter mode.
By these processes, the least digital of displayed data will be flashed to indicate that is ready to be edit.
Change the edit position
Touch the left or right
to change the edit
position.
Enter parameter number
Press
or
to increase or decrease value.
or
Draw on the fly wheel
circularly
to change the value.
2.
Read the value of parameter
press
In
mode
to read parameter value.
3.
Edit parameter value
4.
Write down the parameter value
The proceedures of editing and writing the parameter value are same with the proceedure that are
introduced in paragraph 02.3.4 .
5.
Return
Press
to return to previous mode sequentially.
