JRC11 ADVANCED - Installation
1 INSTALLING THE BATTERIES
We recommend two “AA” alkaline batteries
(not included) for installation.
Operational battery life should typically be
about 2,000 hours.
- Remove the battery cover (11) on the side
of the amplifier
- Install the two batteries in the correct
polarity as shown, and replace the cover.
- Press the MUTE switch (1) and check for
battery test LED illumination (9) to confirm
correct installation.
2 CONNECTING TO YOUR TELEPHONE / HEADSET
- Unplug your telephone handset cord from
the telephone base and plug it into the
HANDSET jack (12) of the amplifier.
- Connect the telephone cord supplied (14)
between the handset jack of your telephone and
the TELEPHONE (TEL) jack (13) of the amplifier.
- Plug your headset into the HEADSET jack (10) of
the amplifier.
4