INSTRUCTION MANUAL CODE 80247 REV A
March/2011
(It can be modified without notice)
Page: 24
J
.P. SELECTA s.a.
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 93 770 08 77 Fax 34 93 770 23 62
e-mail: [email protected] - website: http://www.jpselecta.es
5.3.2 Blank
Pull the reference cuvette into the light path, press [ZERO]
to blank (Fig.2-2).
5.3.3 Utility
Press
[SET] to go into system functions screen, use [»] [«] to select, then press
OK
to go into the corresponding item (Fig. 2-3).
5.3.3.1 Test Mode
Move the cursor on to «Test Mode», and press OK, then it will go into the mode
selection screen (Fig. 2-4).
Then, move the cursor on the photometric mode you want by pressing [»] [«]
and
then press
OK («-» left key) to confirm. Once the symbol
appears at the end of
the item, you can press Cancel
(«-» right key) to return to the upper screen.
5.3.3.2 D2 Lamp Management
Move the cursor on «
D2 Lamp On», press OK, it will go into another screen.
Choose the D2 lamp condition you want, press OK to confirm, then press Cancel
to
return to upper screen.
