7
14
13
12
11
Illustration For Use
To measure object temperature:
1.
the object temperature after hearing
.(see figure 4)
2. Aim the thermometer at the center of the object you want to
measure with The distance less than 5cm.
3. Press the
START BUTTON
and then read the temperature on the
display.
4. Rotate the probe to its original position and it will turn off.
Rotate the probe to the appropriate position, you can take
voice
Figure 4
Illustration For Use
After measurement:
1. Power off: Device will automatically shut off if left idle for
more than 1 minute to extend battery life.
2. Clean the probe after each use to ensure an accurate reading and
avoid cross contamination.
(See the section of Care and Cleaning for details.)
Illustration For Use
1. Rotate the probe to the appropriate position, The display is
activated to show all segments.
3. Read the temperature on the display.
4. Rotate the probe to its original position and it will turn off.
After self-checking Figure 2
appears on the display screen with beeps, so you can start a
new measurement.
2. Aim the thermometer at the center of the forehead with a distance
less than 5cm (See figure 3) and then press the
START BUTTON
.
Note1: Do not remove the thermometer from the forehead before
hearing the final beep. A waiting period of 1 seconds between
testing is recommended to ensure complete accuracy.
Note2:
If the object to be tested is too far from the probe, a
prompt will appear(See figure 5).
To measure forehead temperature:
Figure 3
Figure 2
Figure 4
BackLight:
In Forehead mode:
1. The display will be lighted GREEN for 3 seconds with a happy
face when the unit is ready for measurement and a measurement
is completed with a reading less than 37.3
(99.1 ).
2. The display will be lighted YELLOW for 3 seconds with a happy
face when a measurement is completed with a reading less than
37.8
℃
(100.0 ).
3. The display will be lighted RED for 3 seconds with a bad face
when a measurement is completed with a reading equal to or higher
than 37.8
℃
(100.0 ).
In Object mode:
The display will only be lighted GREEN for 3 seconds when the
unit is ready for measurement and a measurement is completed.
℃
℉
℉
℉
Bluetooth requirements
The thermometer requires a bluetooth device with:
. Bluetooth 4.0 or later
. Android 6.0 or later
. IOS 8.0 or later
And works with:
. iphone , iPod, iPad
. Android Phones and Tablets
Using for the first time
1. Download the "JoyHeath" App from Website or APP Store (Such
as Apple Store).
2.Open the App on your phone or tablet. If requested, you should
enable Bluetooth on your device. You can enable Bluetooth under
the Settings menu on your smart phone or tablet.
3. Create a new user login, or login with your existing user name and
password.
4. Selection device “Thermometer”.
Illustration For Use
1. Probe
2. START Button
3. Set Button
4. Battery Cover