Illustration For Use
Illustration For Use
7
14
Illustration For Use
Illustration For Use
Figure 3
X
√
3. Insert the probe along the ear canal as deep as possible into the
ear as depicted in Figure 3. Then press the
Test BUTTON
once
to start the measurement. A long beep will sound approximately
1 second after the
Test BUTTON
is activated. This signals the
end of the process as results are displayed on the LCD screen.
4. The thermometer is ready for testing again once an ear mark
displays on the LCD. A waiting period of 20 seconds between
testing is recommended to avoid excessive cooling of the skin.
5. The thermometer will shut off automatically after 60 seconds
of inactivity. To prolong battery life, press
Button
to turn
the unit off.
13
12
11
To measure object temperature:
1. First eject the probe cover.
2. Aim the thermometer at the center of the object you want to
measure with a distance of 1 to 2 cm.
3. Press the
Button
to turn on the thermometer, you can take
the object temperature after hearing two beep sounds.(see figure 4)
Remarks:
This mode shows the actual, unadjusted surface temperatures,
which is different from the body temperature.
Figure 4
How to change the ear mode and object mode:
You can press and hold
Setting Button
to switch the mode between
ear mode and object mode.
1.
is in place before each measurement. Place a new probe cover on
the probe firmly; making sure the probe and the inner portion of
the probe cover fit snugly.
2. Press the
, The display is activated to show all
segments.
Remarks:
a. Probe cover sign stand for taking the ear temperature with
probe cover now and vice versa.
b. To avoid the risk of cross contamination, it is recommended
that you always measure the ear temperature with probe cover.
To achieve accurate readings, make sure a new, clean probe cover
Button
After self-checking Figure 2 appears on the display
screen with beeps, so you can start a new measurement. If error
messages appears, it means the thermometer is not ready for
measurement.
To measure ear temperature:
Figure 2
After measurement:
1. Power off: Device will automatically shut off if left idle for
more than 1 minute to extend battery life.
2. Clean the probe after each use to ensure an accurate reading and
avoid cross contamination.
(See the section of Care and Cleaning for details.)
BackLight:
In Ear mode:
1. The display will be lighted GREEN for 3 seconds with a happy
face when the unit is ready for measurement and a measurement
is completed with a reading less then 37.3
(99.1 ).
2. The display will be lighted YELLOW for 3 seconds with a happy
face when a measurement is completed with a reading less than
37.8
℃
(100.0 ).
3. The display will be lighted RED for 3 seconds with a bad face
when a measurement is completed with a reading equal to or higher
than 37.8
℃
(100.0 ).
In Object mode:
The display will only be lighted GREEN for 3 seconds when the
unit is ready for measurement and a measurement is completed.
℃
℉
℉
℉
Product Description
1. Probe Cover
2. Probe
3. Test Button
4. Button
5. Battery Cover
6. Setting Button
3
1
2
5
3
4
6
Electromagnetic Compatibility Information
Electromagnetic Compatibility Information