Joyner JNSZ650DL Скачать руководство пользователя страница 5

Страница: 5 / 40

A FORWORDS ABOUT SAFETY

In order to keep everyone safe, you must take responsibility for the safe operation

of your Go-Kart.

To help you make informed decisions about safety, we have provided operating

procedures and other information on labels and in this manual. This information alerts
you to potential hazards that could hurt you or others.

It is not practical or possible to warn you about all hazards associated with

operating or maintaining a Go-Kart. You must use your own good judgment.

You will find important safety information in a variety of forms, including:

Safety Labels

- On the Go-Kart.

Safety Messages

– Preceded by a safety alert symbol and one of two signal

words:

WARNING

, or

CAUTION

These signal words mean:

Physical harm may result from failure to adhere to the instructions that are described

within the WARNING labels.

Safety Headings

--- such as Important Safety Reminders or Important Safety

Precautions.

Safety Section

--- such as Go- Kart Safety.

Instructions

--- how to use this Go –Kart correctly and safely.

This entire manual is filled with important safety information----please read it

carefully.

Содержание JNSZ650DL









































Результаты поиска

Содержание JNSZ650DL

Отзывы:

Похожие инструкции для JNSZ650DL

Бренды по названию

Популярные бренды

Joyner JNSZ650DL, Руководство пользователя

Результаты поиска

Содержание JNSZ650DL

Отзывы:

Похожие инструкции для JNSZ650DL

Бренды по названию

Популярные бренды