background image

 

Operating this Go-Kart on paved surfaces may seriously affect handling and control of 

the Go-Kart, and may cause the vehicle to go out of control. 
  Never operate the Go-Kart on any paved surfaces, including sidewalks, driveways, 
parking lots and streets.

 

     
 

When driving off-road, also remember to always obey local off-road driving laws 

and regulations. Obtain permission to drive on private property. Avoid posted areas and 
obey “no trespassing” signs. 
 
    You should never drive your Go-Kart on public streets, roads or highways, even if 
they are not paved. Drivers of street vehicles may have difficulty seeing and avoiding 
you, which could lead to a collision. In many states it is illegal to operate Go-Karts on 
public streets, roads and highways. 
 
 

Operating this Go-Kart on public streets, roads or highways can cause collision with 

other vehicle. 
        Never operate this Go-Kart on any public streets, roads or highways, even a dirt or 
gravel one.

 

 
 

Keep Hands and Feet on Controls 

    Always keep both hands on the steering wheel and both feet on the foot controls. 
When driving your Go-Kart. It is important to maintain your balance and control of the 
Go-Kart. Removing hands or feet away from the controls can reduce your ability to 
react and control the kart. 
 
 

Removing hand from Steering wheel or feet from foot controls during operation can reduce 

your ability to control the Go-Kart or could cause you to lose your balance and fall off the 

Go-Kart. 

Always keep both hand on the steering wheel and both feet on the foot controls of your 

Go-Kart during operation.

 

 
 

SAFE DRIVING PRECAUTIONS 

Control Speed 

Driving at excessive speed increases the chance of an accident. In choosing a 

proper speed, you need to consider the capability of your Go-Kart, the terrain, visibility 
and other operating conditions, plus your own skills and experience. 
 

 

13

Содержание JNSZ650DL









































Отзывы: