background image

 

H. Kart Lubrication 

Lubricate vehicle every 90 days of use, Apply several drops of oil in specific 

points. 
 

I. Storage Instruction 

In the event your kart is not to be operated for periods in excess of 30 days or at the 
end of each driving season prepare for storage as follows: 

a.

 

Drain fuel tank and carburetor by allowing engine to run out of fuel, or use a fuel 
stabilizer. 

b.

 

Lubricate engine cylinder by removing the spark plug and pour one ounce of clean 
lubricating oil through the spark plug hole into the cylinder. Crank the engine slowly 
to spread oil and replace spark plug. 

c.

 

Do not save or store gasoline over winter. Using old gasoline, which has 
deteriorated from storage, will cause hard starting and affect engine performance. 

 
 

Do not drain fuel while engine is hot. Be sure to move Go-Kart outside before draining fuel. 

 

REPAIR 

A.

 

Front Wheel Replacement 
Do not disassemble the center castle nuts when you replace the front wheels. 

  (

See Fig. 20

) Tighten the nuts after replacing the wheels. 

 

                                                                 

Figure 20 

 

B.

 

Rear Wheel Replacement 
Do not disassemble the center castle nuts when you replace the front wheels. 

  (

See Fig. 21

) Tighten the nuts after replacing the wheels. 

 

 

25

Содержание Go-kart JNSZ650DS








































Отзывы: