background image

 
 

 
H.

 

Starting And Operating Instructions 

a.

 

Before starting the engine, be sure that the driver is seated properly in the Go-Kart 

and tighten the seatbelt. 
b.

 

Testing the Go-Kart in a open place at the beginning to learn how to start, turn and 

stop. 
c.

 

Operate the Go-Kart slowly until you are familiar with it. 

d.

 

The turning radius of this Go-Kart is small and agile, so the centrifugal force is very 

high when turning at high speed. Slow down to a more controllable speed when turning 
to prevent the Go-Kart from rolling over. 
e.

 

To prevent vehicle from rolling over, be sure to only turn the vehicle at a slow more 

controllable speed.   
 

 
 
 
 

SERVICE INSTRUCTIONS 

A

 

Service Air Cleaner 

Service air cleaner every 80 hours   

NOTE: Service more often under dusty 

conditions. 

 

a.

 

Remove filter cover(

See Fig. 8

b.

 

Check the filter cover and the air filter,   

if the filter cover and the air filter is dusty, 

  please clear the filter cover and   

replace with a new air filter. 

     
                                                                                 

Figure 9 

 
B. Engine Lubrication 

       

Engine oil replacement 

You must change the oil in the crankcase after the first 5 hours of operating of your 

new engine and after 10 hours of use thereafter. That will insure proper lubrication of 
internal parts and prevent costly repairs due to excessive wear. 
 

 

                         

Figure 10

                                                         

Figure 11

                                           

 

 

20

Содержание Go-kart JNSZ650DS








































Отзывы: