![Joycare JC-347 Скачать руководство пользователя страница 14](http://html1.mh-extra.com/html/joycare/jc-347/jc-347_manual_2027543014.webp)
14
15
Filing nails
Wash, clean and dry nails thoroughly. Do not use on broken nails. Ensure that the device is turned
off. Insert the violet-coloured filing roller and place the white plastic guide over it. For inserting/
replacing rollers, see the paragraph “changing rollers”.
This plastic accessory has slots of various sizes on three sides at various angles and allows you to file
nails, but most importantly helps you to give them the desired shape (oval, rounded square, etc.).
Turn the device on by sliding the on/off switch towards the top. The roller begins to rotate. Insert
the edge of the nail into the slot and begin filing.
Stop the device often and check to see if the desired results have been achieved.
When you have finished, turn off the device by sliding the on/off switch towards the bottom.
Rinse nails with water to remove any residue and dry carefully.
Clean the device after each use.
Buffing and shining nails
Ensure that the product is turned off and insert the pink-coloured buffing roller. For inserting/
replacing rollers, see the paragraph “changing rollers”.
Always use the buffing roller first for smooth, even nails, followed by the shining roller to shine
the surface. Turn the device on by sliding the on/off switch towards the top. The mounted roller
begins to rotate. Without applying too much pressure, run the buffing roller over the surface of
the nail for no more than 2 seconds per nail. This helps reduce irregularities and eliminate ridges
and imperfections to create a hard, even surface.
Turn off the device by sliding the on/off switch towards the bottom.
Remove the buffing roller and attach the white-coloured shining roller. Turn the device on and
without applying too much pressure, run the shining roller slowly over the surface of the nail for
no longer than 2 seconds per nail.
When you have finished, turn off the device as previously instructed. Rinse nails with water to
remove any residue and dry carefully.
Clean the device after each use.
Note: the rollers(Smoothing and Polishing) can be used every 2 weeks. More frequent use
is not recommended.
ATTENTION ! Do not apply excessive pressure; slide the roller on the nail for max
1-2 seconds.
REPLACING THE ROLLERS
ATTENTION!
The rollers contain fragile parts and are coated with special materials which are
subject to wear: handle them with care when replacing them.
Using worn rollers may damage the nail and the surrounding skin. When the rollers are damaged
or become less effective, replace them immediately!
The rollers can be used for a few treatment sessions ( about 2/3). To ensure optimal results,
replace the rollers when necessary:
Ensure that the unit is turned off before changing rollers. Pull out the roller and discard it. Insert
Содержание JC-347
Страница 1: ...1 JC 347 ...