joyami L1 JFB02M, Руководство по эксплуатации

Страница: 6 / 16

Note: Wash the inner lid and steam valve
after use.
Maintenance
1. Dismantle the inner lid
B. Hold the inner lid with hands and remove it.
Push upwards to unlock
the inner lid latch.
Open the steam
valver.
A. Push upwards the inner lid latch until the
inner lid pops out automatically .
C. After removing the inner lid, the steam
valve can be seen. Hold two sides of the
steam valve with one hand and pull it out to
one side by translation.
D. Unlock the upper latch of the steam valve to open
it and then take out the sealing strip from the steam
valve.
Note: The steam valve and inner lid must be installed;
otherwise, the lid cannot be closed.
B. Align the steam valve port with the installation
position of the steam outlet and then press it slowly.
A. Insert the sealing strip into the slot on the
lower cover of the steam valve, and press
the upper latch into the buckle after the
bottom of the inner lid is aligned.
C. Insert the inner lid support ring into the
slot, and then slowly press inwards the inner
lid along its bottom as the axis.
D. Fasten the inner lid with the upper latch.
2. Install the inner lid
Insert it from the
bottom.
Push upwards to unlock
the inner lid latch.
05