Jovy Systems® Limited
User Manual
UM1501SLD01
Revision
1.00
Date
August 2015
Page | 7
Modes Guideline
Recognize the solder station’s status is done by observing the led indicator’s color
and state.
Attention!
When the tip is disconnected from the hand piece, the controller gives a
continuous red light indication on the led indicator.
When the controller is active and sensing, the fast flashing Green Led will be seen
from time to time.
Make sure that the toggle button is upwards (Mode 2) when starting the station;
otherwise the station will enter in the debug mode.
1.
Heating up mode
When the tip is fully inserted into the hand piece, the
i
Solder-40 controller starts
to detect the tip.
The indicator of this state is a flashing green led.
2.
Operating mode
When the tip is ready to be used the green led stop flashing and becomes steady
green.
The indicator of this state is a steady green led.