16
B
NAVN:
STI:
M3 NR.:
MATERIALE:
DATO:
SIGN:
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Jøtul F230\90230135.idw
90230135
Røgvenderplader og brændkammerforing
11-08-2017
jm
Jøtul F 230
VÆGT:
AREAL:
N/A
N/A
DIM.:
Scan A/S
B
NAVN:
STI:
M3 NR.:
MATERIALE:
DATO:
SIGN:
DK-5492 Vissenbjerg©
TG.NR:
EMNE:
C:\Working Folder\Designs\Jøtul F230\90230135.idw
90230135
Røgvenderplader og brændkammerforing
11-08-2017
jm
Jøtul F 230
VÆGT:
AREAL:
N/A
N/A
DIM.:
Scan A/S
A
B
B
C
D
6.5 Inspection of the fireplace
Jøtul recommends that you personally inspect your fireplace
carefully after sweeping/cleaning.
Check all visible surfaces for cracks. Also check that all joints
are sealed and that the gaskets are in the correct position.
Any gaskets showing signs of wear or deformation must be
replaced.
6.6 Exterior maintenance
Painted products may change colour after several years
usage. The surface should be cleaned and brushed free of
any loose particles before new paint is applied.
Important!
Never place anything on the top plate of the stove.
This could cause permanent damage to the paint or enamel.
Replacing the baffle plates
7.0 Service
Any unauthorised modifications to the product are
prohibited! Only original spare parts may be used!
7.1 Replacing parts in the burn
chamber
Use tools with great care, when baffle plates and the
combustion chamber lining are removed from the fireplace.
Be aware that the vermiculite plates may be damaged by
rough treatment.
1. Lift the lower baffle
(A)
,remove the pins
(E)
and take out
the baffle plate
(A)
.
2. Lift up the middle baffle plate
(B)
at the rear of the
combustion chamber. Remove the pins
(E)
. Pull the plate
free of the holder
(C)
and take it out. After that you can tilt
out the upper metal baffle
(D)
.
