11
ENGLISH
Fig. 11
1. Unscrew the 4 screws and washers from the top plate of
the cassette.
2. Put the metal ring found in the box supplied with the stove,
around the smoke outlet and secure with the screws and
washers. Do not tighten the screws intirely, until you know
that no more adjusting is necessary.
Fig. 12
150 mm
20 mm
10 mm
1. Cut out a small piece of wood, with the dimensions in the
fi
g above. This will be used as a tool, to secure the adaptor
to the smoke outlet from inside the burn chamber.
The adaptor must be connected to the
fl
ue pipe before the
cassette is placed in the surround. See
fi
g 5a, and steps 3-5
in
fi
g 5b.
Fig. 13a
2
1
1. Fasten the piece of wood into the adaptor, by putting it in
tension.
2. Place the cassette into the surround in the right position
Fig. 13b
7mm
3. Make sure there is a 7 mm gap between the edge of the
cassette, to the surround.
Fig. 14
1. Secure the adaptor from the inside by turning it, using the
wooden piece. Remove the wooden piece when assembled
Reinstall the upper exhaust de
fl
ector (
fi
g 6), exhaust de
fl
ector
(
fi
g 39) and ba
ffl
e plate (
fi
g 38). Reattach the top plate of the
cassette (
fi
g 7).
Содержание C 620
