jotron Tron 40S MkII, Руководство пользователя

Страница: 18 / 35

18 99744_UM_40S_G
4. INNSTALLATION
BRACKETS
Five different brackets are currently available for the Tron 40S. MB5 and MB4 are
the manual brackets. FB5, FB4 and FBH4 are the automatic brackets. The manual
brackets comes without the hydrostatic release mechanism and is used to store the
beacon inside the wheelhouse or other protected places. The automatic
brackets are mounted in a free space outside where the beacon can be released
automatically. MB5 and FB5 are delivered with protective cover.
4.1 FLOAT FREE BRACKET FB5 AND FB4
WARNING:
DO NOT INSTALL THE EPIRB NEAR STRONG
MAGNETIC FIELDS THAT COULD ACTIVATE THE BEACON.
When the Tron 40S is mounted in the float-free bracket, FB5 or FB4, it will operate as
an automatic float free unit. Since the release of the EPIRB will be
automatic it is important to mount the bracket in a place where there are no obsta-
cles that can endanger the automatic release of the EPIRB.The location where the
bracket is mounted should be as high as possible on the vessel, and well protected
from environmental conditions such as direct sea-spray, chemicals, oil, exhaust and
vibrations.The location must also be easily accessible for testing and maintenance.
4.2 FLOAT FREE BRACKET FBH4
See fig. 8 for installation.The float free bracket FBH4 must be connected to the
fixed installation (230V AC, 10A) through the thermostat connection box
according to the connection diagram below.
4.3 MANUAL BRACKET MB5 AND MB4
When the Tron 40S is mounted in the MB5 or MB4 bracket, it will operate as a
manual unit.This bracket is similar to the FB5 and FB4 bracket but does not have
the hydrostatic release mechanism.This bracket is typically used to store the EPIRB
inside the wheel house or other protected areas of the ship.When the Tron 40S is
mounted in the MB5 or MB4 bracket, it must be manually removed before any
operation can take place, therefore the bracket should be mounted in an easily
accessible place where it can be reached in a hurry in case of an emergency.
4.4 MOUNTING THE FB5/MB5/FB4/FBH4/MB4 BRACKETS [FIG. 8]
The bracket is mounted with 4x6mm bolts according to the drawing. Use the bolts
supplied with the bracket.The bracket could be mounted in either an upright or
horizontal position, whichever is the best regarding maintenance and operation.
C O N N E C T I O N D I A G R A M
HEATING ELEMENT
THERMOSTAT
230V AC, 10A