jotron Tron 40AIS, Руководство пользователя, Страница: 22 / 52

jotron.com
Page 22 of 52
1. Fit the groove on the front cover with the tab on the bracket.
2. There is a groove alongside the front cover that must be aligned
and fit around the tongue in the bracket.
3. After aligning the tongue and the groove the front cover can be
closed. If the tongue and groove does not align correctly, it can be
helped by lightly pressing the front cover inwards on the long
side.
4. Firmly press the front cover in place before fitting the locking pin
through the hole in the hydrostatic release. If the hole is not
visible, or you must use force to press down the front cover to
see the hole, the tongue and groove is not aligned. Please take
the front cover off and try again.
5. Make sure the locking pin is mounted the correct way.