Page - 13 -
•
SNMPv1/v2C/v3 Agent
6.1.2
Monitoring and troubleshooting
•
Remote server logging using Syslog.
•
Local in the flash and ram logging.
•
Port based mirroring. The switch system can be configured to mirror frames from multiple ports to a mirror port.
Both incoming (source) and outgoing (destination) frames can be mirrored to the mirror port.
6.1.3
Network configuration
•
Auto-negotiating 10/100/1000 ports automatically configure port speed and duplex setting.
•
Auto MDI/MDIX crossover detection feature for all three speeds on the twisted pair cable.
•
IEEE 802.1AB LLDP for automated device discovery.
6.1.4
Advanced security
•
Web and CLI authentication.
•
RADIUS centralized access, authorization and accounting management.
•
Port based IEEE 802.1X and MAC based authentication system and port settings.
•
Access management filtering IP address. Maximum number of entries is 16. Access from HTTP, SNMP interface
if the host IP address matches the IP address range provided in the table.
•
ACLs (up to 256) for filtering, policing and port copy.
6.1.5
Power over Ethernet (PoE)
•
Support for IEEE 802.3af (PoE) or IEEE 802.3at (PoE+) compliant powered device.
•
Power reservation by exchanging PoE information using the LLDP protocol.
•
Configurable per port PoE mode, priority and maximum power limits.
6.1.6
Quality of Service (QoS)
•
Priority queues: 8 hardware based queues per port for flexible QoS management
•
Configurable scheduling algorithm: Strict Priority (SQP)
•
Basic QoS classification: using QCL (QoS Control Lists)
•
Bandwidth management: ingress rate limiting; egress rate shaping per port
•
Storm control: unicast, multicast and a broadcast storm rate control
6.1.7
Layer 2 switching
•
IEEE 802.1D Bridge, auto address learning/aging and MAC addresses (static) (up to 8000 MACs).
