jotron 103660, Руководство оператора и инструкция по установке

Страница: 79 / 104

Doc. No.: 103839 Rev. A
jotron.com
Page 79 of 104
10.6.1.7 Priorities
From this menu the priorities for the different sensor measurements can be set individually.
I.e. if the unit receives Heading data from two different sources, the settings here specify what data source to be
used.
In order to navigate through the different sensors, administrator password is required.
Priorities of Position, Heading and Rate Of Turn can
be configured in this window. SOG and COG follows
the position priority setting.
Select which “ Port” will have lower or higher
priority.
10.6.1.8 Port monitor
The Port monitor is an important feature in the AIS System which can help troubleshooting connection issues with
different sensors. The “Port monitor” acts as a Terminal window, showing raw data received on a sensor, similar to
Windows “Hyperterminal”
First select which “Sensor port” you want to “listen” to
And if a Sensor is connected it could look similar to these: