EN
SAFETY
5
2 Safety
2.1 Intended Use
These tools are intended for closing boxes made from cardboard. These tools are intended
for stapling with staples as specified in Section “8”. Only use these tools as described in this
manual.
2.2 Forseeable misuse
●
Do not use staples which are not listed in Section “8”.
●
Do not place any staples into unsuitable material.
●
Never use these tools to attach electrical cables.
●
Do not modify tools without prior authorisation.
●
If your stapler is equipped with a position guidance laser (option) never direct laser at persons.
Do not look directly into the laser.
2.3 Working safely
This manual must always be available at the place of operation of the
stapling tool. It must be read and observed by all persons working with
or in the vicinity of the stapling tool.
Preventive and corrective maintenance on the tool may only be carried
out by trained personnel. In addition to this manual, the applicable local
rules for accident prevention and safe and professional operation must
be observed.
The operator or his supervisor is responsible for safe stapling and the selection of the correct
staples (as specified in Section “8”) for the package, depending on its dimensions, weight, stabil
-
ity and the way it will be transported and stored.
Only staples specified for the tool type (Section “8”) must be used. The tools should be adjusted
appropriately for the staples and the package used. The operator is responsible for the correct
tool settings and adjustments.
Wear protective equipment
When operating the tool, wear hand protection (cut-proof gloves) and
safety shoes.
Safety goggles should always be worn by the operator and others in
the work area when loading, operating or servicing these tools.
