![JORGENSEN J1010 Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/jorgensen/j1010/j1010_manual_2026838012.webp)
C.) 1 mV –
Press this button under recording status to print out the
calibration waveform of 1mV to check the current sensitivity
status .
D.) mm/ s –
Allows you to adjust paper /screen speed of your
ECG the options are 12mm/s, 25mm/s and 50mm/s.
E.) Start / Stop –
Starts / stops printing of ECG waveform chosen- will be
highlighted black box shown on left side of screen.
F.) Charge light
-
flashing green = charging
solid green = battery fully charged
G) On / OFF
–
Controls the on / off of
display screen
only
.
Descriptions of Functions on the Screen
Filter settings Heart Rate
ECG lines to be
Battery / AC Icon
printed (highlighted
by the black box) Printer status
Paused / Printing
Sound Tag- not
applicable in this
model
Record Mode
- Record Speed Sensitivity
Auto 1 / Auto 2
Manual 1 / Manual 2
Auto 1- Prints one line of ECG ( highlighted by black box on left) and
automatically switches between leads I,II,III, AVR, AVL and AVF.
Auto 2- Prints two lines of ECG ( highlighted by black box on left) and
automatically switches between leads I,II,III, AVR, AVL and AVF ( if only
one line of ECG is seen on the screen Auto 2 is not applicable).
9
Содержание J1010
Страница 1: ...SINGLE CHANNEL ECG and MONITOR J1010 ...
Страница 2: ......
Страница 31: ......
Страница 32: ...Jorgensen Laboratories Inc 1450 N VanBuren Avenue Loveland CO 80538 800 525 5614 ...