see if the electrical device operates. If the
fuse immediately blows again consult a
dealer.
CAUTION:
Do not use fuses of higher amperage
rating
than
those
recommended.
Substitution of a fuse of improper rating
can cause extensive electrical system
damage and possibly a fire.
Specified Fuse: 15A
- 31-
prevent water entry; a plastic bag and strong
rubber Band may be used.
b. Make sure the spark plug and all filler caps
are properly installed.
2. If the engine case is excessively greasy,
apply degreaser with a paint brush. Do not
apply degreaser to wheel axles.
3. Rinse the dirt and degreaser off with a
garden hose. Use only enough pressure to do
the job.
CAUTION:
Excessive hose pressure may cause water
seepage and deterioration of wheel
bearings, front fork, brakes, transmission
seals and electrical parts. Many expensive
repair bills have resulted from improper
high pressure detergent applications.
4.Once the majority of the dirt has been
hosed, wash all surfaces with warm water
and mild, detergent-type soap.
An old toothbrush or bottle brush is handy
for hard
–
to-touch places.
5.Rinse the scooter off immediately with
clean water and dry all surfaces with a
chamois clean towel, or a soft absorbent
cloth.
- 32-
6.Windscreen Cleaning:
CAUTION:
Avoid using any alkaline or strong acid
cleaner gasoline, brake fluid, or any other
solvent.
Clean the windscreen with a cloth or
sponge
dampened
with
a
neutral
detergent, and after cleaning, thoroughly
wash it off with water. Some cleaning
compounds for plastics may leave
scratches on surfaces of the windscreen .
Before using them, make a test by
polishing an area which does not affect
the visibility.
7.Clean the seat with a vinyl upholstery
cleaner to keep the cover pliable and
glossy.
8.Automotive-type wax may be applied to
all painted and chrome-plated surfaces.
Avoid combination of cleaner and wax.
Many contain abrasives which may mar
the paint or protective finish. When
finished, start the engine and let it idle for
several minutes.
B.STORAGE
Long term storage (60 days or more) of
your scooter will require some preventive
procedures to guard against deterioration.
After thoroughly cleaning the scooter,
prepare for storage as follows:
1.Drain the fuel tank, fuel lines and
carburetor float bowl.
2.Remove the spark plug, pour about one
tablespoon of SAE 10W30 motor oil in
the spark plug hole and reinstall the spark
plug.
