Jonsered HTE2123 Скачать руководство пользователя страница 6

 

6

 

 – 

 

English

 

GENERAL SAFETY PRECA

 

UTIONS

 

Impor

 

tant

Personal protective equipment

 

HEARING PR

 

OTECTION

Wear hearing protection that provides adequate noise 
reduction.

EYE PROTECTION

Always wear approved eye protection. If you use a visor then 
you must also wear approved protective goggles. Approved 
protective goggles must comply with standard ANSI Z87.1 in 
the USA or EN 166 in EU countries.

GLOVES

Gloves should be worn when necessary, e.g., when fitting 
cutting attachments.

BOOTS

Wear sturdy, non-slip boots or shoes.

CLOTHING

Wear clothes made of a strong fabric and avoid loose clothing 
that can catch on twigs and branches. Always wear heavy, 
long pants. Do not wear jewellery, shorts sandals or go 
barefoot. Secure hair so it is above shoulder level.

IMPORTANT!

The machine is only designed for cutting branches and 
twigs.

Never use a machine that has been modified in any way 
from its original specification.

Never use the machine if you are tired, if you have drunk 
alcohol, or if you are taking medication that could affect your 
vision, your judgement or your co-ordination.

Wear personal protective equipment. See instructions 
under the heading ”Personal protective equipment”.

Never use the machine in extreme weather conditions such 
as severe cold, very hot and/or humid climates.

Never use a machine that is faulty. Carry out the checks, 
maintenance and service instructions described in this 
manual. Some maintenance and service measures must be 
carried out by trained and qualified specialists. See 
instructions under the heading Maintenance.

All covers and guards must be fitted before starting. Ensure 
that the spark plug cap and ignition lead are undamaged to 
avoid the risk of electric shock.

!

 

W

 

ARNING! This machine produces an 

electromagnetic field during operation. This 
field may under some circumstances 
interfere with active or passive medical 
implants. To reduce the risk of serious or 
fatal injury, we recommend persons with 
medical implants to consult their physician 
and the medical implant manufacturer 
before operating this machine.

!

 

W

 

ARNING! Running an engine in a confined 

or badly ventilated area can result in death 
due to asphyxiation or carbon monoxide 
poisoning.

!

 

W

 

ARNING! Faulty blades can increase the 

risk of accidents.

 

IMPOR

 

TANT!

Incorrect or careless use of a hedge trimmer can turn it into 
a dangerous tool that can cause serious or even fatal injury. 
It is extremely important that you read and understand the 
contents of this operator’s manual.

You must use approved personal protective equipment 
whenever you use the machine. Personal protective 
equipment cannot eliminate the risk of injury but it will 
reduce the degree of injury if an accident does happen. Ask 
your dealer for help in choosing the right equipment.

!

 

W

 

ARNING! Listen out for warning signals or 

shouts when you are wearing hearing 
protection. Always remove your hearing 
protection as soon as the engine stops.

Содержание HTE2123

























Отзывы: