ASSEMBLY
12 – English
Fitting the trimmer guard and
trimmer head
•
Fit the correct trimmer guard (A) for use with the
trimmer head. Hook the trimmer guard/combination
guard onto the fitting on the shaft and secure with the
bolt (L).
•
Fit the drive disc (B) on the output shaft.
•
Turn the output shaft until one of the holes in the drive
disc aligns with the corresponding hole in the gear
housing.
•
Insert the locking pin (C) in the hole to lock the shaft.
•
Screw on the trimmer head/plastic blades (H) in the
opposite direction to the direction of rotation.
•
To dismantle, follow the instructions in the reverse
order.
Assembling and dismantling the
two-piece shaft
(GC2225C)
Assembly
•
Loosen the coupling by turning the knob.
•
Align the tab of the attachment (A) with the arrow on
the coupling (B).
•
Push the attachment into the coupling until the
attachment snaps into place.
•
Before using the unit, tighten the knob securely.
Dismantling
•
Loosen the coupling by turning the knob (at least 3
times).
Push and hold the button (C). While securely holding the
engine end, pull the attachment straight out of the
coupling.
A
A
B
C
H
H
A
B
C
J1156233-38,GC2225,C_1.fm Page 12 Friday, December 6, 2013 7:26 AM
Содержание GC 2225
Страница 177: ...1 Poly Trim 2 3 4 5 6 7 8 20mm 20mm B A 6 Nm X 10 ...
Страница 178: ... Clic 1 2 3 5 6 7 9 6 0 m 18 4 8 3 05 m 9 2 0 2 4 mm 079 095 10 cm 4 6 15 cm Tap N Go 25 ...
Страница 179: ...Tap N Go 35 Clic 1 2 3 5 6 7 9 8 5 m 28 4 8 4 3 m 14 2 4 2 7 mm 095 106 10 cm 4 6 15 cm ...
Страница 180: ...Tap n Go 35 Spin Clic 1 2 3 5 6 7 9 8 5 m 28 4 8 4 3 m 14 2 4 2 7 mm 095 106 10 cm 4 6 15 cm ...