Jonsered FR 2312 M, Руководство оператора, Страница: 24 / 120

Troubleshooting
Troubleshooting schedule
If you cannot find a solution to your problems in this
owner's manual, speak to your Jonsered service agent.
Problem Cause
The starter motor does not turn
the engine over
The parking brake is not applied. See
To apply and release the parking brake on
page 16 .
The lift lever for the cutting deck is in mow position. See To lift and lower the cut-
ting deck on page 13
.
The main fuse is blown. See To replace the main fuse on page 21 .
The ignition lock is defective.
The connection between the cable and the battery is bad. See
To charge the
battery on page 21 .
The battery is too weak. See
To charge the battery on page 21
.
The starter motor is defective.
The engine does not start when
the start motor turns the engine
over
There is no fuel in the fuel tank. See To fill fuel on page 12 .
The spark plug is defective.
The ignition cable is defective.
There is dirt in the carburettor or fuel line.
The engine does not run smooth-
ly
The spark plug is defective.
The carburettor is incorrectly set.
The air filter is clogged. See To replace the air filter on page 19 .
The fuel tank vent is blocked.
There is dirt in the carburetor or fuel line.
The throttle control is set to choke position or the throttle wire is incorrectly ad-
justed
The engine apparently has no
power
The air filter is clogged. See
To replace the air filter on page 19
.
The spark plug is defective.
There is dirt in the carburetor or fuel line.
The throttle control is set to choke position or the throttle wire is incorrectly ad-
justed
The battery does not charge The battery is defective. See
Battery safety on page 10
.
The connection at the cable connectors on the battery terminals is bad. See
To
charge the battery on page 21 .
There is vibration in the product The blades are loose. See
To examine the blades on page 22
.
One or more of the blades are unbalanced. See
To examine the blades on page
22
.
The engine is loose.
24 512 - 001 - 26.01.2018