Jonsered CS 2117 EL Скачать руководство пользователя страница 7

Страница: 7 / 20

ENGLISH

1. Rear handle

2. Power trigger lockout

3. Front handle

4. Serial No. plate

5. Chain tensioner

6. Chain oil reservoir

7. Chain oil level

8. Ventilation slots

9. Power cable

10. Power trigger

11. Chain

12. Guide bar

13. Chain brake release button

14. Kickback guard

15. Chain drive cover

16. Right hand guard - protects right hand

in case chain breaks or derails

17. Drive sprocket

- concealed by chain drive cover

18. Chain catcher - defl ects chain in case

chain breaks or derails

19. Guide bar nut

20. Nose sprocket

21. Scabbard

22. Combination tool

23. Operator’s manual

CHAIN SAW PARTS

• Dress safely. Avoid jewellery and loose-fitting clothing,

which may be caught in moving parts. Approved safety mitts

and sturdy footwear which gives a good footing are recom-

mended (also for helpers).

Wear: - Approved face mask or safety goggles

- Approved hearing protection

- Approved helmet

- Approved safety boots with protective rein-

forcement, steel toecap and non-slip soles

- Clothing which is snug without hampering

movement

- Approved gloves with protective reinforcement

Always keep a fi rst-aid kit on hand!

SAFE USE

CAUTION!

Never operate a chain saw with one hand only. Doing so may lead to i serious injury to operator,
helpers or bystanders. An electric chain saw is designed for operation with both hands.

Use of accessories not conforming to the recommendations outlined in the Operating
Instructions could lead to injury.

The chain saw must not be modifi ed in any way under any circumstances without the

permission of the manufacturer. Use only original accessories. Unauthorized modifi cations and/

or accessories may cause serious or fatal injury of the operator or others.

Содержание CS 2117 EL





















Результаты поиска

Содержание CS 2117 EL

Отзывы:

Похожие инструкции для CS 2117 EL

Бренды по названию

Популярные бренды

Jonsered CS 2117 EL, Руководство оператора

Результаты поиска

Содержание CS 2117 EL

Отзывы:

Похожие инструкции для CS 2117 EL

Бренды по названию

Популярные бренды