Jonsered CS 2117 EL, Руководство оператора

Страница: 3 / 20

ENGLISH
1
Contents 1
EC declaration of conformity 1
Symbols 2
Important! Read before using chain saw 2
Technical specifi cations 4
Chain saw parts 5
Safe use 5
Starting and stopping 7
Daily inspection and maintenance 7
Kickback prevention 8
Chain brake with kickback guard 9
- Kickback guard inspection 9
- Manual chain brake function check 9
- Inertia chain brake function check 9
Mounting guide bar and adjusting chain 10
Chain catcher 11
Right hand guard 11
Slip clutch 11
Electronic overload protection 2000W 11
Cutting equipment 11
Chain and guide bar lubrication 12
- Chain oil 12
- Filling chain oil 12
- Checking automatic 12
chain lubrication system
- Checking chain wear 12
Filing chain 13
Limbing 13
Crosscutting 14
Felling operations 14
- Danger zone 15
- Felling direction 15
- Clearing branches/Line of retreat 15
- Felling 15
EC DECLARATION OF CONFORMITY
Husqvarna AB, 561 82, Huskvarna, Sweden,
declare under our sole responsibility that the product(s);
Category.......................................... Electric chainsaw
Type(s)............................................. Jonsered CS2117 EL & CS2121 EL
Identifi cation of Series..................... See Product Rating Label
Year of Construction........................ See Product Rating Label
conforms to the essential requirements & provisions of the following EC Directives: 2011/65/EU, 2006/42/EC, 2006/95/EC,
2004/108/EC, 2000/14/EC based on the following EU harmonized standards applied: EN60745-1, EN60745-2-13, EN50366,
EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3.
INTERTEK SEMKO AB
,
0413, PO Box 1103, 164 22 KISTA, Sweden, has issued reports regarding the assessment of conformity to
article 12 section 3 (c).
Certifi cate no. ...............................
1117352
The maximum A weighted sound pressure level L
pA
at the workstation, measured according to EN60745-2-13, corresponds to the
Noise Emissions given in the technical specifi cations table. The maximum hand / arm vibration weighted value, measured according
to EN60745-2-13, on a sample of the above product(s) corresponds to the vibration value a
h
given in the table.
The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one
tool with another. The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning : The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in
which the tool is used. Operators should identify safety measures to protect themselves that are based on an estimation of exposure
in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
2000/14/EC: The Measured Sound Power L
WA
& Guaranteed Sound Power L
WA
values are according to the tabulated fi gures.
Conformity Assessment Procedure......... Annex V
Ulm 22/12/2010
P. Lamelli
Global R&D Director - Hand held, Keeper of technical documentation