background image

 

6 – 

 

English

 

SAFETY INSTRUCTIONS

 

General working instructions

 

Basic safety rules

 

1

Look around you: 

-

To ensure that people, animals or other things cannot 
affect your control of the machine.

-

To ensure that people, animals, etc., do not come into 
contact with the cutting attachment or loose objects 
that are thrown out by the cutting attachment.

2

Do not use the machine in bad weather, such as dense 
fog, heavy rain, strong wind, intense cold, etc. Working in 
bad weather is tiring and can lead to dangerous 
conditions, e.g. slippery surfaces.

3

Make sure you can move and stand safely. Check the area 
around you for possible obstacles (roots, rocks, branches, 
ditches, etc.) in case you have to move suddenly. Take 
great care when working on sloping ground.

4

The engine must be switched off before moving.

5

Never put the machine down with the engine running 
unless you have it in clear sight.

CAUTION! Do not use the machine unless you are able to call 
for help in the event of an accident.

 

Basic working techniques

 

Always ensure you have a safe and stable working 
position.

Always hold the machine with both hands. Hold the 
machine on the right of your body.

When the engine is switched off, keep your hands and feet 
away from the blades until they have stopped.

Make sure your hands and feet do not come near the 
cutter when the engine is running.

Always keep the tines close to the ground.

Always slow the engine to idle speed after each working 
operation. Long periods at full throttle without any load on 
the engine (i.e. without the resistance that the cutting 
attachment exerts on the engine when you are using the 
machine) can lead to serious engine damage.

Pay extra attention when pulling the cultivator towards you 
while working.

If heavy vibration occurs, stop the machine. Disconnect 
the HT lead from the spark plug. Check that the machine 
is not damaged. Repair any damage.

 

Safety instructions after completing work

 

Make sure the cutting attachment has stopped before 
cleaning, carrying out repairs or an inspection. 
Disconnect the HT lead from the spark plug. 

Wear heavy-duty gloves when repairing the cultivator.

Store the machine out of reach of children.

Use only original spare parts for repairs.

IMPORTANT!

This section takes up the basic safety precautions for 
working with a cultivator.

If you encounter a situation where you are uncertain how to 
proceed you should ask an expert. Contact your dealer or 
your service workshop.

Avoid all usage which you consider to be beyond your 
capability.

!

 

WARNING! At times grass and stones can 
become caught in the tines. Always stop the 
engine when cleaning.

!

 

WARNING! Watch out for thrown objects. 
Always wear eye protection. Never lean over 
the cutting attachment guard. Stones, 
rubbish, etc. can be thrown up into the eyes 
causing blindness or serious injury.

Keep unauthorised persons at a distance. 
Children, animals, onlookers and helpers 
should be kept outside the safety zone of 15 
m. Stop the machine immediately if anyone 
approaches.

The bevel gear can get hot during use and 
may remain so for a while afterwards. You 
could get burnt if you touch it.

Содержание ca 150















Отзывы: