Jonsered ca 150 Скачать руководство пользователя страница 3

 

English

 

 – 3

 

CONTENTS

 

Contents

Note the following before starting:

 

Jonsered has a policy of continuous product development 
and therefore reserves the right to modify the design and 
appearance of products without prior notice.

Long-term exposure to noise can result in permanent hearing 
impairment. So always use approved hearing protection.

Please read the operator’s manual carefully and make sure 
you understand the instructions before using the machine.

These instructions supplement the instructions that were 
included with the machine. For other procedures, please refer 
to the operating instructions for the machine.

The machine is only designed for cultivating.

 

KEY TO  SYMBOLS

 

Symbols .......................................................................

2

 

CONTENTS

 

Contents ......................................................................

3

Note the following before starting: ................................

3

 

SAFETY INSTRUCTIONS

 

Personal protective equipment .....................................

4

Machine

 

 

s safety equipment  ........................................

4

General safety precautions  ..........................................

5

General working instructions  .......................................

6

 

WHAT IS WHAT?

 

What is what on the cultivator attachment?  .................

7

 

ASSEMBLY

 

Fitting the bevel gear  ...................................................

8

Assembling the guard.  .................................................

8

 

STARTING AND STOPPING

 

Check before starting ...................................................

9

 

MAINTENANCE

 

Bevel gear  ....................................................................

10

Replacing the tine  ........................................................

10

Maintenance schedule  .................................................

10

 

TECHNICAL DATA

 

Technical data  ..............................................................

11

!

 

WARNING! Under no circumstances may the 
design of the machine be modi

fi

ed without 

the permission of the manufacturer. Always 
use genuine accessories. Non-authorized 
modi

fi

cations and/or accessories can result 

in serious personal injury or the death of the 
operator or others.

!

 

WARNING! This accessory may only be used 
together with the intended clearing saw/
trimmer, see under heading ”Approved 
accessories” in chapter Technical data in the 
machine’s Operator’s Manual.

Содержание ca 150















Отзывы: