manualshive.com logo in svg

Jonsered BC2043, Руководство оператора, Страница: 11 / 32

Поделиться
Скачать
Jonsered BC2043 Скачать руководство пользователя страница 11

English

 – 11

ASSEMBLY

Fitting the main body

Connect the engine (A) to the tube (B) with four screws (C).

Fitting the handlebar

•

Fit the handlebar in the handlebar clamp on the shaft 
using six screws.

•

Attach the cabling to the shaft with two cabling holders.

•

Put on the harness and hang the machine from the 
support hook. Now make a final adjustment so that the 
machine is in a comfortable working position when it 
hangs from the harness.

Connecting throttle cable and stop 
switch wires

1

Remove the air filter cover.

2

Insert the throttle cable (A) through the carburettor bracket 
(B), then screw the cable adjuster sleeve (C) into the 
carburettor bracket fully.

3

Position the slotted fitting (D) on the carburettor so the 
recessed hole (E) for the cable lug (F) is away from the 
cable adjuster sleeve.

4

Rotate the carburettor throttle cam and slip the throttle 
cable through the slot in the slotted fitting, making sure the 
cable lug drops into the recessed hole.

5

Operate the throttle trigger a few times to make sure that 
it works correctly.

6

Adjust the cable adjuster sleeve so the stop on the 
carburettor throttle cam just contacts the throttle stop and 
the cable position keep 1-2 mm play between the cable 
lug and the slotted fitting when the throttle trigger is fully 
depressed.

7

When the throttle cable is adjusted correctly, tighten the 
locking nut (G).

8

Plug the stop switch wires (H) into the matching 
connectors from the engine. Note that wire polarity is not 
important.

A

B

C

1-2mm

H

Содержание BC2043

































Отзывы:

Нет отзывов