Jonix maximate, Руководство по эксплуатации и обслуживанию

Страница: 30 / 44

30
JO NIX
maximate
17
230 VOLT
ALIMENTAZIONE ELETTRICA
POWER SUPPLY
SPANNUNGSVERSORGUNG
230V/3/50Hz
19
18
Fig. 17: Screw delicately the ionising tube
holding on to the base (green part).
ATTENTION: do not overtighten
the screw after reaching its end
stop.
Fig. 18: If the operation is difficult to
perform, pull slightly the earthing spring so
that it is not in contact with the surface of
the tube.
Check that the earthing spring
is in contact with the outer
mesh once the ionising tubes
have been screwed back into
place. Otherwise contact the
manufacturer.
Fig. 19: Refit the top panel. Turn on
the unit by acting on the disconnector
On / Off switch to the position I. Close the
front doors.