Jonix 70WHMINIMATE4, Руководство по эксплуатации и обслуживанию

Страница: 28 / 64

28
JO NIX
minimate
06
07
08
09
MIn
3 mm
Fig. 06: Pull off the outer mesh from the
tube if you have not already done so in the
previous point.
If this is difficult to do, turn the mesh around
the glass while pulling to remove it.
Fig. 07: Clean the glass using a damp
cloth.
Do not use liquid cleaners or
sprays, soap or the like.
Check that the tube is in good conditions: there must not be any cracks or other damage;
otherwise it must be replaced. As soon as you notice a whitish layer on the perforated
metal plate inside the glass it means that the ionising tube needs replacing.
The tubes must usually be replaced within 18 months of use.
Fig. 08: Wash the mesh under running hot
water and dry it thoroughly with a cloth.
Fig. 09: Put the outer metal mesh back on
the glass tube so that it fully overlaps the
internal plate.
In any case ensure a minimum
distance of at least 3 mm from
the base of the tube.
Do not put back the mesh on
the ionising tube if it is even
partially wet.