3
ASSEMBLY
1. REMOVE
unit from carton and check the contents of the parts bag.
2
. REMOVE
mounting hardware from the hardware bag.
3. ATTACH
the handle to the engine base
BY tighten C
.
4. TIGHTEN
mounting hardware on handle braces.
5. ATTACH
guard bar to Skid bar by installing the side bolts
6. Rotary latch D, Release the latch, then turn the handle, Replace the latch to lock
the handle.
OPERATION
OPERATOR CONTROLS
The operator’s station is at the rear of the machine between the handlebars. The operator should STAND in a position to allow
both handlebars to be grasped firmly and which allows sufficient leverage to steer the machine. Operator’s controls are shown
below.
Operator Control Locations
A Propelling
Clutch Lever
B
Blade Clutch Lever
1 STOP engine
2 Choke and start engine
3 Work
Fig. 1
