TROUBLESHOOTING
ALWAYS UNPLUG THE MACHINE BEFORE
DISCONNECTING OR CONNECTING ANY WIRES OR
COMPONENTS
SYMPTOM
POSSIBLE CAUSE
No spray
Solution tank is empty;
Solution hose is not completely connected to machine & tool;
Spray tip on tool is plugged;
Pump is not running;
Pump inlet filter is dirty or plugged;
Pump not
running
No power to pump;
•
Check outlet for power;
•
Power to cord or switch is bad;
Low suction
Recovery tank not sealed;
Damaged vacuum gasket;
Dirty vacuum inlet screen;
Recovery hose loose or cracked;
No suction
Recovery tank is full;
Vacuum motor is not running ;
•
Check outlet for power;
•
Power cord is bad;
•
Bad switch;
•
Bad vacuum motor;
Always use original equipment replacement parts.
Contact your distributor for additional information or to arrange for service.
9
