Jomlabs Dsh4, Руководство пользователя

Страница: 23 / 25

Dsh4 – User Manual Ver. 1.0 (Dsh4_Deep_Purple.hex)
23
Jam Mode 4.3.
Pressing simultaneously switches D & E (factory setting), or through the definition of a function in a switch, you can set Jam mode.
In this mode you have direct access to the activation / deactivation of the Loops for each switch.
After Jam mode is selected, loops activated in current bank will lit. To toggle on a loop you must press its respective switch,
labelled in orange, below the switch.
Next table shows functions associated to each switch:
Jam Mode
A,B,C,D,E,F,G,H Toggle On / Off Switch
D+E Toggle Jam Mode / Bank Mode
F+G Exit Jam Mode
G+H Save current loops combination into selected bank