5.0 Installation
5.1 Installation Safety
5.1.1
8
Jolywood (Taizhou) Solar Technology Co.,Ltd.
Kaiyang Rd., Jiangyan Economic Development zone, Taizhou City, Jiangsu Province, P. R. China
www.jolywood.cn
+86-523-8061 2361
Installation Manual
- Jolywood N-type Mono-crystalline Double Glass Module
4.2.2
When unpacking, cut all vertical packing belts
with a blade or scissors, first cut the long side
packing belt, secondly cut the short side packing
belt. Remove the upper cover of the carton and
take out two or three upper lifting brackets.
5.1.2
Do not remove module package before
installation.
5.1.3
When installing modules, only work in a dry
environment with dry tools. Do not work in a
humid environment without wearing any
protective measures. Do not install modules
under any rainy, snowy or windy conditions. Keep
the connectors dry and clean when installing
modules to avoid the risk of electric shock. If the
terminal of the module is wet, no work could be
done, otherwise electric shock may be caused.
Modules should be installed immediately after
unpacked.
5.1.4
Do not wear metal rings, wristwatches, earrings,
nose rings, lip rings, or other metal materials
when installing or repairing PV systems.
5.1.5
Use opaque materials to cover the module
completely during installation. Do not open the
electrical connection or pull out the connector
while the circuit is under load. Do not touch the
modules during installation unless necessary.
Glass surfaces and brackets may have high
temperature, which might lead to the risk of
hazards of burns and electric shock.
The modules produced by Jolywood could
installed landscape or portrait, the influence of
shading effect caused by dust could be minimized
when installed landscape.
4.2.4
Modules removed out of package are prohibited
from leaning against a without reliable support or
an unfixed object.
Double glass modules produced by Jolywood
could work for more than 30 years under proper
conditions. Modules with an expired life should be
reasonably disposed in accordance with local
laws and regulations. Besides requirement of IEC
certification, the product has been tested to verify
its resistance to ammonia, which may be present
near the cowshed, whether it could work in a wet
(coastal) areas, areas where sandstorms occur
frequently are also tested.
4.2.3
When removing modules from package, two
people stand must stand on each side of the box
while lifting the module, one hand grasping the
corner of the module, the other hand grasping the
short side of the module. When unpacking on a
horizontal floor, remove modules from one side to
the other side of package, and then carry them. If
unpacking on a non-horizontal floor, use a
supportive tool to ensure package placed
verticality.
