5.2.5 Grounding
5.2.5.1
13
Jolywood (Taizhou) Solar Technology Co.,Ltd.
Kaiyang Rd., Jiangyan Economic Development zone, Taizhou City, Jiangsu Province, P. R. China
www.jolywood.cn
+86-523-8061 2361
Installation Manual
- Jolywood N-type Mono-crystalline Double Glass Module
5.2.5.2
Module could be grounded with a grounding
equipment listed by a third party. The equipment
must be installed in accordance with the
instructions given by the grounded equipment
manufacturer.
JW-HD144N/P modules can also be installed with
flat single axis tracker. The specific installation
methods are as follows:
All module frames and brackets must be properly
grounded in accordance with the appropriate
National Electrical Code. The grounding
conductor or grounding wire could be made with
copper, copper alloy or other material, which
should also be in accordance with the
requirements of corresponding National Electrical
Code. The grounding conductor must be
connected to the ground through a suitable
grounding methods.
5.2.4 Installation of full frame double
glass modules (Installation with flat
single axis tracker)
Use inner four holes for bolt installation
C-shaped steel perpendicular to the long frame
maximum test load: front ≤5400Pa
back ≤2400Pa
JW-HD144N/P
The long frame uses the inner four holes (400mm)
for bolt installation
maximum test load: front ≤1600Pa
back ≤1600Pa
JW-HD144N/P
The long frame uses the inner four holes
(1300mm) for bolt installation
maximum test load: front ≤2400Pa
back ≤2400Pa
JW-HD144N/P
