How to Use the Watch
Basic Operations
Power On
Press and hold the side button for 4 seconds, the watch will vibrate and turn
Screen Wake Up Options
A. Tap the display screen
B. Press the side button
C. Turn and raise wrist to activate screen wake up function
Basic Operation
Connected App
To close any measurement
graph, you may have entered
while in the App, tap on the “X”
found on the top left of your
device screen. This will close
the current screen and you will
be returned back to the main
menu screen. To select a
previous daily data, tap on the
clipboard logo found on the
top right of your device screen.
Smart Device
This device is an interactive touch screen display and requires you to scroll
Left/Right/Up/Down to navigate through the different menus with your finger.
To select an option, tap the screen to activate the function or to enter the next
menu display. If left unselected for more than 6 seconds the watch display will
enter sleep mode and requires to be woken up to continue.
Please note when using the below functions ensure the following is avoided.
This is to ensure measurements are not disrupted and are as accurate as
possible.
1. Ensure the back of the device is in contact with the skin to avoid any direct
external light and placed
in the correct position
on the wrist
2. The skin is clean without sweat
3. The back of the device is clean from any contaminates. (Clean with a damp
microfiber or soft cloth)
on. If the device fails to power on, it could be due to insufficient power and will
need to be charged.
Power Off
Press and hold the side button for 4 seconds while on the main menu screen.
The device will show a prompt asking to Shut Down. Tap Yes to power off or No
to cancel. Alternately scroll to the Power Menu and tap the “Power” Icon to
enter the menu. Tap the “Power Off” icon to shut down and tap the tick icon to
proceed. The restart and reset options can also be found here.
Note: the reset option will place the device back to the factory settings.
