Jolly LP-H400, Руководство пользователя, Страница: 14 / 18

9.Maintance and cleaning
It is absolutely essential that the fixture is kept clean and that dust,dirt and smoke fluid residues must not
buildup on or within the fixture. Otherwise, the fixtures light-output will be significantly reduced. Regular
cleaning will not only ensure the maximum light-output, but will also allow the fixture to function reliably
through out its life. A soft lint-free cloth moistened with any good glass cleaning fluid is recommended,
under no circum stances should alcohol or solvents be used!
The front objective lens will require weekly cleaning as smoke-fluid tends to building up residues,reduc-
ing the light-output very quickly.The cooling-fans should be cleaned monthly.
The gobos may be cleaned with a soft brush,The interior of the fixture should be cleaned at least annua-
lly usinga vacuum-cleaner or an air-jet.
Maintenance and maintenance of the operation, please contact the manufacturer or distributor.
DANGER:Disconnect from the mains before starting any maintenance work.
- 10 -
8.DMX protocol
Mode 1 Mode 2 Fade Type Function Dmx Value
1 1 Dimmer Dimmer 0-100% 0-255
2 Dimmer Fine Dimmer Fine 0-100% 0-255
No function (shutter Close) 0
Strobe effect slow to fast 1-95
No function (shutter open) 96-127
Pulse-effect in sequences 128-159
No function (shutter open) 160-191
Random strobe effect slow to fast 192-223
No function (shutter open) 224-255
3 4 Linear CTO 5200-2500K 0-255
No function 0-15
5000 16-45
4500 46-75
4200 76-105
3900 106-135
3600 136-165
3300 166-195
3000 196-225
2700 226-255
No function 0-9
linear 10-19
gamma1.5 20-29
gamma1.0 30-39
curve s 40-49
No function 50-255
Strobe 2 3
6 Dimming curve
4 5 Fixed CTO