Jolly Roger INTERNATIONAL SPEEDWAY CAR CAROUSEL, Руководство пользователя

Страница: 11 / 34

JOLLY ROGER AMUSEMENT RIDES
Stamar “Plug n Play” Kiddie Ride Controller Credit Programming Instructions
4.7 The “Plug n Play” Timer Unit can now be programmed “on-site” for any Credit functions as shown by
the following instructions. This facility is incorporated on all software from JRTDv4 onwards
Fig 1 Programmable Control Unit
Credit Programming sequence
1. Turn Ride OFF
2. Make a note of the current SW1 settings
3. Set ALL SW1 switches to the OFF position
4. Turn the Ride ON
5. Enter coins to the value of the first Credit value
6. Press the Ride Start Switch for the number of rides required for this credit value
7. Insert coins for the next credit value required
8. Press the Ride Start Switch for the next number of rides required
9. Repeat this process until ALL credit values have been entered
10. Now PRESS and HOLD the Ride Start Switch until the voice prompt announces that the
programming is completed, approximately 4-5 seconds
11. Turn the Ride OFF
12. Set ALL SW1 switches to the ON position
13. The new Credit Program is now installed
14. If at any time during the process, you wish to cancel the programming function, simply turn
the Ride OFF and re-set the original SW1 positions. This will restore the previous credit
program
Page 9