Pag. 11
C A M I N E T T I S . P. A .
leader nel riscaldamento
CLADDING
Start assembling the cladding and the relative hood: put the
control unit in a suitable position.
A window must be fitted to allow for the feeding of the
humidifier. It is necessary creating an air grille in the hood
(min. 10x30 cm) without any filters, nets or other closures:
IMPORTANT
Should the installation of the fireplace be done in a basement, fit
the air intakes 20x20 (or diam. 20) outside, by using flexible pipes
and creating an air intake, under the fireplace, connecting the
internal room with outside to allow the ventilator to intake air from
outside (solution A).
Otherwise, make a hole in the hood, communicating with
outside, diam. 150 (solution B), leaving the air passing through
the base of the cladding (min. meas. 10x30).
the grill must be connected to the air intake without any pipe
connection (see example).
A gap must be left between the fireplace and the cladding
to allow for the ventilator to get the air.
A
B
4
linea 220V
Hood ventilation grille10x40
