Jolimark DP550, Руководство пользователя

Страница: 57 / 64

DP550 User's Manual
- 53 -
◆
About fanfold assembly
○ Fixation method
• The fixation method of fanfold paper assembly is to sizing 1mm line in front of paper
inserts direction.
• Sizing with strong mucilage and press it tightly to avoid cocking.
• Please not make the glue come out of paper edge.
• Sizing place can not have obvious creases or burr.
○ Assembly
Mount (the bottom paper) can use other thickness paper or same thickness paper.
Besides, it also can use the paper weight out of the range in the following table, but the
paper feed precision is worse, so it is can included in the guarantee list.
◆
Related stipulates of puckering, bend and crimp
Print papers are easy become puckering, bend or crimp after disposal, transit, pile by people
and different conditions of storing. These will affect paper feeding. So please use them after
correcting according to following stipulates. Please not use the paper which is not up to the
specifications, or it may affect paper feed badly. Our company will not guarantee the device
and its capability after using the incorrect paper.
○
Pucker (Cut sheet, tractor paper)
• Do not use the papers which pucker whole page.
(Because even after amended, paper intensity have been changed)
• Corner amend should be less than 2 mm.
Type Paper quality Each page of
paper (*1) Maximal autotype
pages Paper total thickness
Single
paper Good quality paper 45 〜 180kg
(52 〜 208g/m
2
)
—— ——
Fanfold
paper Pressure sensitive
paper and inner
fanfold paper Use 34kg
（ 40g/m
2
） as
standard
7 pages (o 6
pages) Less than 0.8mm
Caution: Weight of each sheet refers to acreage of 788 * 1091mm, using kg to show
the weight of 1000 pages.
Strong mucilage
(1mm width)
Paper inserts direction