Jolimark DP550, Руководство пользователя

Страница: 37 / 64

DP550 User's Manual
- 33 -
4.8 Description of Options
Options Description
SYSTEM SETUP
LANGUAGE
Choose the language set menu, menu content according to setting of the
language style to print.
EMULATION Select the printer emulation of EPSON, ESC/PK2 or OKI 5530SC
CHAR. MODE Select the ASCII or China character mode.
CHARACTER
FONT
Set the font for the printer to use in the absence of any font control instructions
from your software.
ENG PITCH Set the pitch to determine the horizontal spacing of the printed ASCII.
CHI PITCH Set the pitch to determine the horizontal spacing of the printed Chinese.
SLASH ZERO
Select or cancel the printing of a slash (/) through zero to distinguish them from the
letter O.
INTL CHAR SET
Select interior character (only with EPSON compatible). (USA France Germany
Britain Denmark I Sweden Italy Spain I Japan Norway Denmark II Spain II
Latin America Korea LEGAL Holland Turkey )
CHARACTER SET Select character set into Italic Character Table or Graphic Character Table.
PAGE LAYOUT
LINE SPACING
Set the vertical spacing of the printed characters. You can set it to either 6 LPI (the
default setting) or 8 LPI.
FORM LENGTH Set the length of your printer paper, for both cut sheets and continuous-feed paper.
PAGE SKIP Select (ON) or cancel (OFF, the default) a bottom margin of one inch.
COMPRESS PRT Select compressed print mode or normal print mode.
LEFT EDGE
Setting distance from the first print character to the left paper edge, unit is 1/10
inch.
BLACK MARK Whether or not choose the black mark detection. (options )
PRINT SETUP
PRINT DIR
Print direction mode contains one-way 、 bidirectional and automatic mode. When
default option is automatic mode, print direction is bidirectional. Only choosing
“automatic mode”, print direction instruction is in effect. If choosing “one-way” or
“bidirectional” mode, print direction instruction is invalid.
HIGH-DENSITY Open or close the high quality printing.
QUIET MODE
Select the printer into quiet mode. The acoustic noise is lower but the printing
speed is reduced by half.
AUTO LF
Select (ON) or cancel (OFF) the automatic advance of the paper by one line after
every carriage return command.
LOADING
This determines the action of the printer while the single sheet paper is front
feeding.
PUSH KEY disables automatic loading allowing loading only by pressing the
LF/FF key. The other options allow automatic feeding after the stated delay time.
SKEW DETECT
Skew detect divides into 8 levels from 001-007. Skew detect value (right and left
top of form vertical error value) is from 1.2mm to 4.8mm, each level is 0.6mm
discrepancy.
MARGIN DETECT
Open or close the margin detect function.