Jole roomie glide, Инструкция по эксплуатации

Страница: 17 / 19

29
30
Bedside Sleeper
Assembly
see images Fig. 1 - Fig. 26
Please read all the instructions in this manual before setting up and using this
product.
!
Please make sure that the adjustable side rail faces in the same direction
with adjustable feet.
Rocking Function
Activation
see images Fig. 27 - Fig. 28
!
Please lock the rocking function during using the unit as bedside sleeper.
(Fig. 28)
Height Adjustment
see images Fig. 29 - Fig. 32
!
The crib can be adjusted to different height positions.
!
The crib can be inclined with a maximum variance of 4 positions between
one leg and the other (for example: the right leg in position 5 and the left leg
in position 1, see fig.
(Fig. 31) & (Fig. 32) ).
!
It only be applicable to cradle state, but not to bedside sleeper state.
!
The head of the child should always be positioned on the highest side.
Use Wheels
see images Fig. 33 - Fig. 34
At this point the crib is ready to be used.
!
Do not use the crib with adjustable feet partially or totally rotated and
unlocked. The correct position for use is illustrated in figure (Fig. 26) . In the
case of accidental knocks against adjustable feet, return them to the
correct position by lifting the crib slightly.
Use Bedside Sleeper
see images Fig. 35 - Fig. 46
1.Press the button (Fig. 35-1) to drop the side down (Fig. 35-2) .
2.Position next to bed (Fig. 36) , Connect Buckle to roomie glide (Fig. 38) then
loop strap around bed frame and connect to adjuster buckle (Fig. 39) , then
pull straps tight (Fig. 40) .
!
During fixing the crib to the parent’s bed, If it is not possible to slide the feet
of the crib under the parent’s bed, you can rotate the adjustable feet.
(Fig. 37)
3.The maximum height difference between the parents’ mattress and the drop
side at the lowest position is 2cm (Fig. 41)
4.The type of adult bed which can be used with bedside sleeper is shown on
(Fig. 42, 43, 44) , and can not be used with bedside sleeper is shown on
(Fig. 45)& (Fig. 46) .
!
Check to make sure that the crib in the bedside sleeper mode does not
interfere with the parent’s bed.
!
During use, make sure that the parents bed sheets, blankets etc. Do not
enter and cover the interior of the crib.
!
In the bedside sleeper mode the 2 legs of the crib should always be
adjusted to the same height.