11
12
Stroller Assembly
Please read all the instructions in this manual before assembling and
using this product.
Open Stroller
Separate storage latch from storage mount
1
, and then lift the handle
upwards
2
, a click sound means the stroller is open completely.
!
Check that the stroller is completely open before continuing.
Assemble Front Wheel
Assemble front wheel to front leg. Check that the front wheel is securely
attached by pulling on wheel assembly.
3
To disassemble front wheel, detach front wheel from front leg
4
- 2
while
pressing the release tabs outwards.
4
- 1
Assemble Rear Wheels
Align the axle of the rear wheel with the rear wheel mount, and then insert
to assemble the rear wheel
5
. Check that wheels are securely attached by
pulling on wheel assemblies.
To disassemble rear wheel, detach rear wheel from rear wheel mount
6
- 2
while pressing the release button.
6
- 1
Assemble Armbar
Align the armbar end slider with matching fixing slot, and then insert to
lock.
7
To disassemble armbar, press armbar release button
8
- 1
, and then pull
up the armbar.
8
- 2
The completely assembled stroller is shown as
9
Stroller Operation
Adjust Backrest
Recline Backrest
Pull the backrest backwards, while pressing the button in the center of the
angle adjuster.
10
Raise Backrest
Push the backrest forwards, while pulling the webbing at the end of the
angle adjuster.
11
!
Make sure the recline is set properly for use.
Use Buckle
Release Buckle
Press the center button to release the buckle.
12
Lock Buckle
Match the waist belt buckle with the shoulder buckle
13
- 1
, and click into
the center buckle.
13
- 2
A “click” sound means the buckle is locked completely.
13
- 3
!
To avoid serious injury from falling or sliding out, always secure your
child with harness.
!
Make sure your child is snugly secured. The space between the child
and the shoulder harness is about the thickness of one hand.
!
Do not cross the shoulder belts. This will cause pressure on child’s neck.
Use Shoulder & Waist Harnesses
!
In order to protect your child from falling out, after your child is placed
into the seat, check whether the shoulder and waist harnesses are at
proper height and length.
14
- 1
Shoulder harness anchor A
14
- 2
Shoulder harness anchor B
14
- 3
Slide adjuster
For larger child, use shoulder harness anchor A and the highest shoulder
slots. For smaller child, use shoulder harness anchor B and the lowest
shoulder slots.
To adjust the position of the shoulder harness anchor, turn the anchor to
be level with the side facing forward. Thread it through the shoulder
harness slot from back to front.
15
Rethread it through the slot that is closest to child's shoulder height.
16
Use slide adjuster to change the harness length.
17
- 1
Press the button
17
- 2
, while pulling the waist harness to proper length.
17
- 3
Adjust Calf Support
The calf support has 2 positions.
Raise Calf Support
To raise the calf support, just push it upwards. A "click" sound means the
calf is locked completely.
Lower Calf Support
Press the adjustment buttons on both sides of the calf support
18
- 1
, and
rotate the calf support downwards.
18
- 2
