Surface Technology
Oberflächentechnik
i
Surface Technology
Oberflächentechnik
9
Operating principle of the oil mist lubricator
The micro oil mist lubricator ensures uniform, rapid and precisely dosed hand grinder lubrication.
The oil mist lubricator is set to 3 drops per minute.
The special air supply makes it possible to reduce the size of the oil particles. The latter can
be conveyed in the airflow over wide distances as micro mist. They are scarcely deposited. All
surfaces with which they come into contact are intensively and very evenly moistened. An even,
stable oil film results on the bearing surfaces with a thickness that can be rapidly and precisely
adjusted.
Setting up and connecting the maintenance unit
1. On the maintenance unit, check whether:
• the condensate drainage screw is closed;
Turn to the right to close.
• dthe pressure adjustment screw is open; Turn to the left to open.
2. Fill the oil container up to the mark with joke high performance lubricant X 73012.
The oil level must not reach higher than the deflector of the microoil mist lubricator .
Order no. for the lubricant in different container sizes, refer to the joke catalogue.
Take care that the air flows through the housing in the direction indicated by the arrow.
The label on the container shows the minimal and maximal oil
level. If the level of oil falls below the minimum oil level, it must
be refilled.
Figure 7.2 View from above maintenance unit
Adjusting screw
Refill screw
