Surface Technology
Oberflächentechnik
i
3
3
5
2
4
1
6
Surface Technology
Oberflächentechnik
11
Figure 7.4 Setting hand grinders W 90/23 into operation
Setting hand grinders W 45/23 and W 90/23 into operation
When using a locking shaft (7.4/2):
1. Secure the mandrel in the hand grinder with a locking pin.
2. Insert the second locking pin through the locking shaft (7.4/2) and screw the locking shaft into
the hand grinder.
3. Screw tool (7.4/1) into the locking shaft.
4. If necessary, cover (7.4/6) can be removed after loosening a headless pin with the Allan key
(7.4/5).
When using a collet, set the hand grinder into operation as described in the following section.
