3
Safety instructions
joke
I nstructi on manual
DI PROFI L
®
FMR/E5 /E10 /E15 mi ni hand-fi li ng machi ne
4
This device has been built according to the latest technical standards and
generally accepted safety regulations. Nevertheless, it can constitute dan-
ger to life and limb for operator
or third parties and a
hazard to the de-
vice itself or other equipment during use.
IMPORTANT
(1)
Only use the device if in perfect working order and for its intended pur-
pose. You must always pay attention to the instruction manual and sa-
fety instructions therein and be aware of the risks! Repair any faults
which could affect the device’s safety immediately by yourself or
have these repaired
.
The unit is designed exclusively for grinding, milling and polishing work
with the tools listed and approved in the
joke
catalogue „Surface
Finishing“. Any other use will be deemed to be contrary to its intended
purpose. The manufacturer cannot be held liable for any resulting
damages. The risk is borne solely by the user.
Correct use also includes compliance with the instruction manual and
an observation of the care and maintenance conditions.
(2)
Keep the instruction manual handy at the device’s place of use.
(3)
Pay attention to and observe generally applicable statutory and oth-
erwise binding regulations relating to accident prevention and envi-
ronmental protection in addition to the information provided in the in-
struction manual!
CAUTION!
(4)
All personnel commissioned to work on or with the device must have
read this instruction manual, and particularly the safety instructions
chapter, before starting work. This applies especially for personnel who
only work with the device occasionally.
(5)
Stop the device immediately should you notice changes to the device
or its operating behaviour that are relevant to its safety. Have these
remedied before restarting work.
(6)
Do not carry out any modifications, additions or conversions to the de-
vice! This also applies to the installation and adjustment of safety e-
quipment.
IMPORTANT!
(7)
Spare parts must meet the technical requirements specified by the
manufacturer. This can only be guaranteed with original
joke
spare
parts.
